ap-profile

Profile selection from internal database

  • 1. Select cladding type, element type, profile, color, coating, thickness in dialogue window. It is possible to set slope against or along profile in degrees or percents
  • 2. “Accept” button sets all selected parameters for current profile
  • 3. All parameters of current profile will be used for drawing of vertical or horizontal objects until new current profile will be selected
  • 4. Repeatedly opened dialogue window shows all parameters of current profile.
Select beam

Select beam

Select joint

Select joint

ap-vc

Inserts vertical items

  • 1. Select facade contour by left button (must be preformed as polygon or closed polyline)
  • 2. Select alignment point by left button (for example corner of facade or window)
  • 3. Instead of alignment point (pt 2) it is possible to press [Enter]. In this case alignment point will be set to left side of facade contour automatically
ap-hc

Inserts horizontal items

  • 1. Select facade contour by left button (must be preformed as polygon or closed polyline)
  • 2. Select alignment point by left button (for example corner of facade or window)
  • 3. Instead of alignment point (pt 2) it is possible to press [Enter]. In this case alignment point will be set to bottom side of facade contour automatically
Converts view to plane

Converts view to plane

  • 1. Select object to get all profiles with equal slopes
  • 2. Pick point for plane
Cuts openings

Cuts openings

  • 1. Select opening contour by left button (must be preformed as polygon or closed polyline)
  • 2. Objects full width intersecting with opening contour will be divided automatically
Divides items by dividing lines or openings

Divides items by dividing lines or openings

  • 1. Select opening contour or dividing line by left button
  • 2. Select all objects you want to divide and press [Enter]
  • 3. Objects intersecting with opening contour or dividing line will be divided automatically
  • 4. This command designed for dividing of long items or dividing objects partially intersecting with opening contour or dividing line
Divides items by dividing lines or openings with gap

Divides items by dividing lines or openings with gap

  • 1. Select opening contour or dividing line by left button
  • 2. Select all objects you want to divide and press [Enter]
  • 3. Type gap value and press [Enter]
Converts axis lines into dividing lines

Converts axis lines into dividing lines

  • 1. Select facade contour by left button to set dividing lines
  • 2. Select axial lines for converting into dividing lines and press [Enter]
Adds supports

Adds supports

  • 1. Select axis lines (must be created as polylines on layer “FS-axis”)
  • 2. Type support width value and press [Enter]
Support 1

Support 1: B/2+B/2

  • 1. Select axis and press [Enter]
  • 2. Select objects to divide by B/2+B/2 mode and press [Enter]
support 2

Support 2: continuous

  • 1. Select objects to append and press [Enter]
support 3

Support 3: B/2+0.1L

  • 1. Select axis
  • 2. Select nearest axis to the right side to calculate distance
  • 3. Select objects to divide by B/2+0.1L mode and press [Enter]
support 4

Support 4: 0.1L+B/2

  • 1. Select axis
  • 2. Select nearest axis to the left side to calculate distance
  • 3. Select objects to divide by 0.1L+B/2 mode and press [Enter]
support 5

Support 5: 0.1L+0.1L

  • 1. Select axis
  • 2. Select nearest axis to the left side to calculate distance
  • 3. Select nearest axis to the right side to calculate distance
  • 4. Select objects to divide by 0.1L+0.1L mode and press [Enter]
Support 0.1L+0.2L

Support 0.1L+0.2L

  • 1. Select axis
  • 2. Select nearest axis to the left side to calculate distance
  • 3. Select nearest axis to the right side to calculate distance
  • 4. Select objects to divide by 0.1L+0.2L mode and press [Enter]
Support 0.2L+0.1L

Support 0.2L+0.1L

  • 1. Select axis
  • 2. Select nearest axis to the left side to calculate distance
  • 3. Select nearest axis to the right side to calculate distance
  • 4. Select objects to divide by 0.2L+0.1L mode and press [Enter]
Clear side overlap

Clear side overlap

  • 1. Select objects to clear side overlap and press [Enter]
Side overlap 50%

Side overlap 50%

  • 1. Select objects to set side overlap 50% and press [Enter]
Side overlap 2x

Side overlap 2x

  • 1. Select objects to set side overlap 2x and press [Enter]
Side overlap 3x

Side overlap 3x

  • 1. Select objects to set side overlap 3x and press [Enter]
Sets nonstandard RAL color

Sets nonstandard RAL color

  • 1. Select nonstandard RAL color in color table
  • 2. Select destination objects to set new color and press [Enter]
Sets Zn coating

Sets Zn coating

  • 1. Select destination objects to set Zn coating and press [Enter]
Sets other thickness

Sets other thickness

  • 1. Select objects to set new thickness and press [Enter]
  • 2. Type new thickness value and press [Enter]
Matches selected item properties

Matches selected item properties

  • 1. Select object by left button to set source properties
  • 2. Select destination objects to match properties and press [Enter]
  • 3. Command matches profile, thickness, length, color, coating and slopes.
Changes length from the start of item

Changes length from the start of item

  • 1. Start point is set to bottom side of vertical object and right side of horizontal object
  • 2. Select objects to change length and press [Enter]
  • 3. Type lengthening value or pick two points on screen and press [Enter]
  • 4. If shortening is required, type negative value (keyboard option only)
Changes length from the end of item

Changes length from the end of item

  • 1. End point is set to upper side of vertical object and left side of horizontal object
  • 2. Select objects to change length and press [Enter]
  • 3. Type lengthening value or pick two points on screen and press [Enter]
  • 4. If shortening is required, type negative value (keyboard option only)
Performs numbering of all items in the drawing

Performs numbering of all items in the drawing

  • 1. Performs automatical numbering of all objects in the drawing
  • 2. Attention: sorting and numbering requires time dependent on complexity of drawing and quantity of different objects and properties.
Shows information for selected item

Shows information for selected item

  • 1. Select object by left button to get information
  • 2. If properties window moved, selected item will be highlighted
Shows and hides number labels

Shows and hides number labels

  • 1. Dependent on drawing status shows and hides number labels
Shows and hides all labels

Shows and hides all labels

  • 1. Dependent on drawing status shows and hides all labels
Shows and hides length labels

Shows and hides length labels

  • 1. Dependent on drawing status shows and hides length labels
Shows and hides color labels

Shows and hides color labels

  • 1. Dependent on drawing status shows and hides color labels
Shows and hides thickness

Shows and hides thickness

  • 1. Dependent on drawing status shows and hides thickness labels
Shows and hides slope against profile

Shows and hides slope against profile

  • 1. Dependent on drawing status shows and hides slope against profile labels
Shows and hides slope along profile

Shows and hides slope along profile

  • 1. Dependent on drawing status shows and hides slope against profile labels
Shows and hides side overlap

Shows and hides side overlap

  • 1. Dependent on drawing status shows and hides side overlap labels
Shows and hides construction line

Shows and hides construction line

  • 1. Dependent on drawing status shows and hides construction line
Add grouping line automatically

Add grouping line automatically

  • 1. Select object to get all similar profiles
Add grouping line manually

Add grouping line manually

  • 1. Select object to get all similar profiles
  • 2. Pick two points on screen for grouping line
Deletes all objects and tables

Deletes all objects and tables

  • 1. Deletes all objects and tables automatically
Sets drawing data for Insert border command

Sets drawing data for Insert border command

  • 1. Opens text file for drawing data editing
  • 2. Write required data and save file
  • 3. Saved data will be inserted into drawing border
Inserts predefined A4 border

Inserts predefined A4 border

  • 1. Pick area by two points on screen for drawing border
  • 2. Border scale will be calculated automatically by selected area
  • 3. Instead of selecting area it is possible to press [Enter]. In this case drawing border will be inserted in scale M1:100. Pick border insertion point on screen
Inserts predefined A3 border

Inserts predefined A3 border

  • 1. Pick area by two points on screen for drawing border
  • 2. Border scale will be calculated automatically by selected area
  • 3. Instead of selecting area it is possible to press [Enter]. In this case drawing border will be inserted in scale M1:100. Pick border insertion point on screen
Inserts predefined A2 border

Inserts predefined A2 border

  • 1. Pick area by two points on screen for drawing border
  • 2. Border scale will be calculated automatically by selected area
  • 3. Instead of selecting area it is possible to press [Enter]. In this case drawing border will be inserted in scale M1:100. Pick border insertion point on screen
Inserts predefined A1 border

Inserts predefined A1 border

  • 1. Pick area by two points on screen for drawing border
  • 2. Border scale will be calculated automatically by selected area
  • 3. Instead of selecting area it is possible to press [Enter]. In this case drawing border will be inserted in scale M1:100. Pick border insertion point on screen
Inserts specification table

Inserts specification table

  • 1. Pick table insertion point on screen
  • 2. Write description for specification
  • 3. Specification table will be created for all objects in drawing
  • 4. Tip: insert A4 format drawing border in scale M1:100 before calling of specification command
Inserts specification table by selection

Inserts specification table by selection

  • 1. Select objects for specification and press [Enter]
  • 2. Pick table insertion point on screen
  • 3. Write description for specification
  • 4. Tip: insert A4 format drawing border in scale M1:100 before calling of specification command
Inserts specification table by color

Inserts specification table by color

  • 1. Select object for specification by color and press [Enter]
  • 2. Pick table insertion point on screen
  • 3. Write description for specification
  • 4. Tip: insert A4 format drawing border in scale M1:100 before calling of specification command
Inserts specification table by thickness

Inserts specification table by thickness

  • 1. Select object for specification by thickness and press [Enter]
  • 2. Pick table insertion point on screen
  • 3. Write description for specification
  • 4. Tip: insert A4 format drawing border in scale M1:100 before calling of specification command
Specification table exported to tab-delimited format file

Specification table exported to tab-delimited format file

  • 1. Opens specifications in tab-delimited format file for importing into speadsheet
Inserts legend of profiles

Inserts legend of profiles

  • 1. Pick A4 border insertion point on screen
  • 2. Command inserts legend for all used profiles in drawing
Inserts cladding label

Inserts cladding label

  • 1. Select object for label
  • 2. Pick point on screen for text label
  • 3. Text style and size depends on current dimension style settings
Registration order-form

Registration order-form

  • Attention: Windows Vista requires AutoCAD loaded in administration mode (right click on icon and “Run as administrator”)
  • 1. Fill-in license request form. All fields required
  • 2. Send us new created registration file by email
About application

About application

  • 1. Opens links to online help in browser
Vertical beam

Vertical beam

Vertical beam2

Vertical beam

Vertical beam3

Vertical beam

Vertical beam4

Vertical beam

Horizontal beam

Horizontal beam

Horizontal beam2

Horizontal beam

Horizontal beam3

Horizontal beam

Horizontal beam4

Horizontal beam

Freehand beam

Freehand beam

Vertical joint

Vertical joint

Horizontal joint

Horizontal joint

Joint by object

Joint by object

Freehand joint

Freehand joint

Table of profiles

Table of profiles

Table of beams

Table of beams

Table of beams by selection

Table of beams by selection

Table of beams by thickness

Table of beams by thickness

Table of joints

Table of joints

Table of joints by selection

Table of joints by selection

Table of joints by color

Table of joints by color

Project data2

Project data

Panel overlap

Panel overlap

Move labels up

Move labels up

Move labels down

Move labels down

Total specification

Total specification

Edit specification line

Edit specification line

Table of profiles by selection

Table of profiles by selection

Table of profiles by color

Table of profiles by color

Table of profiles by thickness

Table of profiles by thickness

Vertical profile

Vertical profile

Horizontal profile

Horizontal profile

Insert border

Insert border

All product names, registered trademarks, trade names or company names mentioned at in-axis.com or in-axis.lt are used for identification only and are the property of their respective owners.